In this article I am going to give you my quick review of all the NEXTEC tools available now. Craftsman just announced that they are greatly expanding the Craftsman NEXTEC 12 volt Cordless power tools in May 2011 so this is a good time to go over the entire line. The Craftsman NEXTEC QuickBoost Charger will hit shelves in May 2011 and will be followed shortly by a NEXTEC 12-volt 3-in-1 garden tool, string trimmer, hedge trimmer, vacuum, digital inflater, work light and second generation "Hammerhead" Auto Hammer.
Lithium Ion Tools
I like tools. I like "Tim the Toolman Taylor" Tools. Bigger is better! More Power! Oo-OoO! So when Craftsman sent me the NEXTEC Cordless 12 volt Power Tools last spring I used them, wrote a couple of articles on these cute little tools and then promptly put them down in my basement workshop. They were nice, lightweight tools. They had plenty of power, but I still went back to my "big" tools. I basically forgot about them.
Lithium Ion Tools
Then, I went into my local Sears around Thanksgiving and I saw customers literally buying the NEXTEC Lithium-Ion Drill/Driver as fast as the store personnel could put them out. What was really strange to me is these NEXTEC 12 volt drills were flying off the shelves, but no one was buying the DeWalt DCD710 12V MAX lithium drill from the display right along side the NEXTEC's. I knew is was a nice little drill, but I didn't think everyone else liked it that much. The same thing was happening with the Craftsman NEXTEC 12.0 Volt Right Angle Impact Driver was selling well but no one was buying the Dewalt DCF815 12V MAX 1/4 impact driver right next to it.
During the winter I move into a room in the basement. It's small, only 10 X 10 ft so I don't have room for a lot of stuff. My router, a workbench with a wood vise, a few hand tools and a set-up table. There is no room for my table saw, miter saw, jointer and drill press. I end up cutting my wood out in the unheated garage, bringing it downstairs, fitting it up, going back out in the garage to drill the holes or joint an edge, back down stairs......you get the picture.
Well, while I was getting the room ready for the winter I found the NEXTEC tools and decided to take a good hard look at them again.
I decided that I would use these tools exclusively in my downstairs workshop this winter.
What I like:
Weight. The NEXTEC tools weigh only half of even my lightest cordless drill.
Size. Easy to handle even for small hands. Don't feel too small like the little cordless screwdrivers for big hands
Power. Have as much power as the old 15.6 tools and I think a lot more power than the old 7.2, 9.6, 10.8 and 14.4 tools. More power than the C3 19.2 volt Model 17191
In the rest of this article I will give quick review of each tool:
Craftsman NEXTEC 12.0V Lithium-Ion Drill/Driver Model 17586 What I like: It costs less than half of DeWalt DCD710 12V MAX Drill. It weighs less at only 2.2 lbs. with the 12.0 Volt Lithium-Ion battery. It will fit in your hand and easily slip into the pocket of your work apron. This is the most powerful drill on the market for the weight. It has 195 in.-lbs. of Torque which is plenty for most of the tasks around your home. It has a 2-Speed Gearbox and a 3/8-Inch Single Sleeve Keyless Chuck. A lot of guys thin they need a 1/2 inch chuck, but if you look at the wall at your nearest hardware store 95% of the drill bits and screwdriving bits will fit in this drill. 18 Position Adjustable Torque Clutch. Integrated LED Work Light. 30-Minute Quick Charger What I don't like: I really like this drill and about the only thing I would put on it would be a battery charge indicator. It would be nice to know when the battery is about to run out.
Craftsman NEXTEC 12.0 Volt Right Angle Impact Driver Model 17562 What I like: Even though Sears states this has only 700 in lbs of torque a bunch of us feel it has as much power as the Dewalt DCF815 12V MAX 1/4 impact driver for a lot less money. We also liked the right angle drive. It will get into places the other drills can't. What I don't like: The right angle takes a little practice to get used to. When you first use it...use both hands until you get the feel for the impact driver. After that you will enjoy using it.
Craftsman 17428 Nextec 12-volt Cordless Compact 1/4'' Impact Driver Model 17428 What I like: Same weight and feel as the Model 17586 Drill/Driver. What I don't like: Could use a battery meter.
12-volt NEXTEC Multi-Tool Model 17438 What I like: Multi-tools are quickly becoming the go-to tool for cutting, sanding, grout removal and scraping. This lightweight tool can easily do the work of a trim saw, jamb saw, drywall saw, detail sander, rotary grout tool, carbide cutter and paint scraper. The Craftsman NEXTEC is one of the lightest of the bunch and it will accept the Fein attachments. This gives it the most versatility of all the mulit-tools out there. It has plenty of power to do all these tasks around the home. The batteries last about 20 minutes during continuous use, charge in 30 minutes and you can get a second battery if you need one for less than . What I don't like: Eventually I would like to see quick release blade changing. It only takes 30 seconds to change the tool now, but I want to do it faster!
NEXTEC 12-volt Lithium-Ion Hammerhead Auto Hammer Model 11818 What I like: I don't use nails very often anymore. I use screws for most of my woodworking tasks, but the other day I put a few more lights in the basement and the Hammerhead was the right tools to nail the outlet boxes into the rafters. It only took 30 seconds to nail the box into the beam and NO BENT NAILS! What I don't like: Craftsman is coming out with a new version of this about May 2011. I will wait to give you my viewpoint then.
Craftsman NEXTEC 12.0V Lithium-Ion True Finish™ Sander Model 61326 What I like: This is a "Mouse" size sander but it has two big advantages over all the other sanders like it on the market. One, it is cordless! The battery lasts a long, long time. Two, It doesn't make your hand go numb! The built in counter balancer cancels out the hand numbing vibration you are used to. What I don't like: NO ONE knows about this sander! It comes in one kit and you can get the "bare" tool online but very few people realize how nice this sander is.
Craftsman NEXTEC 12.0V Lithium-Ion Circular Saw Model 61325 What I like: This is the one tool in the NEXTEC line that I really don't like. It has enough power to cut even hard maple, but the design is all wrong. The base plate "shoe" is too big for the saw, The saw mark on the shoe is too far away from the blade. It doesn't have a laser guide, the light is in the wrong place, the blades are too thick and there is not enough of a selection of blade styles. What I don't like: Oops, I already told you what I don't like.
Craftsman 14299 Nextec 12-volt Cordless Multi-Saw Model 14299 What I like: I use this saw a lot for the size, power, and versatility. It has a lot of power for the size and is really handy for those quick cuts. It uses standard jig saw blades which come in all sizes and styles. What I don't like: It doesn't have a "blower" to keep the sawdust away from your cut line.
Craftsman NEXTEC 12 volt LED Worklight Model 14298 What I like: This is a great work light and flashlight for the house. It will run continuously for hours on one battery and the battery stays charged for over a year if you don't use it. The head swivels for under the sink work and it stands up all by itself. What I don't like: My wife saw it, and immediately stole it to put on her nightstand! Now if it only came in decorator colors!
Craftsman 12 Volt Nextec Compact Lithium-Ion battery Model 11221 What I like: You can buy additional batteries for less than . A lot of power for the size. (as much as your old 14.4 batteries) Will hold a charge for up to a year. With the new charger Craftsman just announced will recharge to 25% in less than 3 minutes. What I don't like: I would like a little clip so I can hang a spare on my belt.
Summary: The Craftsman NEXTEC 12 volt Cordless power tools are great for homeowners. They are lightweight, strong and easy on the wallet to buy. They work surprisingly well for the size and cost a lot less than other brands. I highly recommend these tools.
Craftsman NEXTEC Cordless Tools: Real Power Tools or Just Toys?
Lithium Ion Tools
Oct 29, 2011 11:27:55

Click for larger image and other views
>> Click here to update Cheapest prices for Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit <<
Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit Feature
- 4-pole motor for 480 inch-pounds max torque; 2-speed transmission (0-400 / 0-1,500 RPM)
- 7-9/16 inches long; weighs only 3.3 pounds
- Built-in LED light illuminates work area
- Battery and charger produce 430 percent more total lifetime work, 2.5 times more cycles
- Backed by 3-year warranty on tool; 1-year warranty on battery and charger
Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit Overview
The Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill delivers power, performance, and improved ergonomics in a compact size. The LXFD01CW weighs only 3.3 pounds, and the 18-Volt Compact Lithium-Ion battery reaches a full charge in only 15 minutes on Makita's ENERGY STAR qualified Rapid Optimum Battery Charger for more work and less downtime.

View larger |
|
LXFD01CW Features | POWER - Makita-built 4-pole motor delivers 480 inch-pounds of Max Torque
COMFORT - Only 3.3 pounds with comfortable ergonomic grip and built-in LED light
SPEED - 2-speed all-metal transmission
PERFORMANCE - 18-Volt Compact Lithium-Ion batteries charge in 15 minutes, run longer, and deliver 2.5X more cycles
INCLUDES - (2) 18-Volt Compact Lithium-Ion batteries, rapid charger, and case |
|
Tool Specifications |  | Capacities | Steel (1/2"), Wood (1-1/2") | No Load Speed | 0-400, 0-1,500 rpm | Max Torque | 480 in.lbs. | PTI Torque | 290 in.lbs. | Battery | 18V Compact Lithium-Ion | Overall Length | 7-9/16" | Net Weight | 3.3 lbs. (w/battery) |
|
Makita-Built Motor Engineered for Versatile PowerThe LXFD01CW features a Makita-built four-pole motor that delivers 480 inch-pounds of max torque and 290 inch-pounds PTI Torque, with an all-metal two-speed transmission (0-400/0-1,500 rpm) to cover a wide range of drilling and driving applications. At only 7-9/16 inches long and 3.3 pounds, the LXFD01CW has a compact and ergonomic design for reduced operator fatigue and a new rubberized soft grip for increased comfort on the job. The built-in LED light illuminates the job area for applications in low-light conditions and close quarters.
Versatile Design for a Range of Applications
The LXFD01CW is engineered for a range of drilling and driving applications and is ideal for HVAC, electrical, plumbing, remodeling, and woodworking. The combination of power and performance in a compact size makes the LXFD01CW ideal for any professional contractor who requires a best-in-class engineered compact cordless driver-drill. The LXFD01CW is another example of Makita's commitment to innovative technology and best-in-class engineering.
About Makita's 18-Volt Compact Lithium-Ion Cordless Tool Series
As one of the pioneers driving the cordless tool revolution, Makita changed the game with its breakthrough 18-Volt LXT lithium-in cordless series. Five years after its debut, Makita's LXT series has grown from 7 to over 35 tools, providing a wide range of cordless solutions for professional tradesmen. Makita also added 18-volt compact lithium-ion for cordless power in a more compact size.
Makita's 18-volt lithium-ion batteries and ENERGY STAR rated Optimum Charging system provide several benefits over old battery technology. When compared to traditional 18-volt NiCad batteries, Makita's 18-volt lithium-ion batteries have 40 percent less weight, longer run time, and five-times lower self-discharge to keep cells active and ready to use at any time. Makita's 18-volt lithium-ion battery delivers 2,000 cycles--two-and-a-half times more than a NiCad battery. In addition, built-in shock-absorbing features help protect the battery, and sixteen firm-holding contact terminals deliver constant high power.
During the charging process, a built-in memory chip in the battery communicates with the Optimum Charger for a more efficient charge, extending the battery life. Makita's Optimum Charger is also fast: it will charge an 18-volt LXT lithium-ion battery in just 30 minutes and an 18-volt compact lithium-ion battery in only 15 minutes. Makita also offers a Rapid Automotive Charger for 18-volt LXT and 18-volt compact lithium-ion batteries that plugs into 12-volt DC sockets equipped in most automobiles and trucks for added mobility.
About Makita
Makita is a worldwide manufacturer of industrial-quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are compact and energy efficient, yet deliver industrial-strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. Makita is Best in Class Engineering.
Warranty
Every Makita lithium-ion tool is backed by Makita's 3-year warranty that covers repair due to defects in materials or workmanship up to three years from the date of original purchase. Makita lithium-ion batteries and chargers have a limited 1-year warranty.
What's in the Box
Makita LXFD01CW 18-volt compact lithium-ion cordless 1/2-inch driver-drill, two 18-volt compact lithium-ion batteries, 15-minute rapid optimum charger, tool belt clip, double-ended bit (Phillips and slotted), and tool case.
SAVE NOW on the special offers below!
Available In Stock. |
This Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit ships for FREE with Super Saver Shipping. |
|
Limited Offer Today!! Makita LXFD01CW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit Black Friday and Cyber Monday Deals
Portable Hd Projector Vizio Lcd Hd Tv